fbpx
0
Your Cart

Working Principle:

There are three types of flanged telescopic butterfly valves:

  • Ordinary type: design and install according to the design specifications of the expansion joint when selecting. If you need to add limit bolts, please specify when designing.
  • Fixed limit type : It can be stretched and limited, and has the function of fixing the telescopic part to prevent it from stretching. It is characterized by multiple functions and wider application range.
  • Lengthened type: it lengthens the expansion joint of the ordinary telescopic butterfly valve to make the length meet the length required by the user (excluding the expansion and contraction amount). Its characteristic is that the valve on the original pipeline needs to be updated when the old pipeline is reconstructed For replacement, it can be replaced without dividing the connecting part of the valve on the original pipeline. Limit measures should also be considered when selecting the lengthened type. If the limit is required, please indicate it when designing.

Features:

  1. The sealing part can be adjusted and replaced, and the sealing performance is reliable.
  2. Unique structure, flexible design, light weight, labor saving, quick opening and closing.
  3. The telescopic butterfly valve can not only compensate the function of thermal expansion and cold contraction caused by the temperature difference of the pipeline, but also provide convenience for the maintenance of valve installation and replacement.

Installation Precautions:

  1. The flanged telescopic butterfly valve must be placed flat before installation. Do not bump it at will. It is strictly forbidden to remove the bracket during operation.
  2. Structural length of the flange telescopic butterfly valve : The lower limit length when it leaves the factory . When installing, pull it to the installation length (ie the design length).
  3. When the length between the pipes exceeds the installation length of the expansion valve, please adjust the interval between the pipes, and do not force the expansion butterfly valve to avoid damage to the butterfly valve.
  4. The flanged telescopic butterfly valve can be installed arbitrarily. When it is used for temperature compensation, after the installation of the pipeline is completed, brackets should be added at both ends along the axis of the pipeline to prevent the expansion pipe of the expansion valve from being pulled out.

The main technical parameters:

Nominal diameter DN (mm) 50~2000 50~1600
Nominal pressure PN (MPa) 0.6 1.0 1.6
Sealing test (MPa) 0.66 1.1 1.76
Strength test (MPa) 0.9 1.5 2.4
proper temperature soft seal X:-40℃~90℃; XF:-20℃~200℃
hard seal Carbon steel: -29℃~425℃ Stainless steel -40℃~650℃
Applicable media Water, air, natural gas, oil and weak corrosive fluids
leak rate Comply with GB/T13927-92 standard
drive mode Worm gear drive, electric, pneumatic, hydraulic

Main parts and materials:

Part Name Material
valve body WCB, QT450-10, stainless steel
Butterfly WCB, QT450-10, stainless steel
valve shaft 2Cr13 stainless steel
sealing ring rubber
filler Flexible graphite

Adopt standard:

Manufacturing Standards JB/T8527-97, GB/T 122387-89
flange standard GB9113-2000, GB17241.6-1998
Inspection standards GB/T 13927-92

Main dimensions PN1.0MPa

Flange telescopic butterfly valve structure

 

DN
(mm)
Manual device D D1 d b C L n-d0 4-M H H1 H2 L1 L2 L3 L4 L5 φ WT
(kg)
L0 Lmax Lmin
300 3D-30/250 445 400 370 28 57 282 302 252 8-φ23 M27 959 542 267 449 178 254 104 473 300 148
350 3D-30/250 505 460 429 30 64 301 321 271 12-φ23 M20 1048 583 315 449 178 254 104 473 300 188
400 3D-30/250 565 515 480 32 70 313 333 283 12-φ28 M24 1120 620 350 449 178 254 104 473 300 237
450 3D-30/250 615 565 530 32 76 334 354 304 16-φ28 M24 1190 667 373 449 178 254 104 473 300 268
500 3D-30/400 670 620 582 34 76 346 366 316 16-φ28 M24 1280 702 428 486 178 254 130 528 300 289
600 3D-60/800 780 725 682 36 89 398 418 368 16-φ31 M27 1409 759 450 627 196 245 162 596 400 480
700 3D-60/800 895 840 794 40 115 425 445 395 20-φ31 M27 1613 885 528 627 244 245 162 596 400 645
800 3D-120//1500 1015 950 901 44 120 455 475 425 20-φ34 M30 1736 1013 573 635 244 295 196 711 300 818
900 3D-120//1500 1115 1050 1001 46 120 485 505 455 24-φ34 M30 1860 1071 639 635 270 295 196 711 300 956
1000 3D-120//1500 1230 1160 1112 50 150 495 515 465 24-φ37 M33 2107 1234 723 955 270 296 295 807 300 1277
1200 3D-120//1500 1455 1380 1328 56 175 542 562 512 28-φ40 M366 2326 1343 833 955 455 296 295 807 300 1764
1400 3D-200/4000 1675 1590 1530 62 195 612 632 582 32-φ43 M39 2996 1668 1078 1270 455 387 414 1089 500 4280
1600 3D-200/4000 1915 1820 1750 68 220 640 660 610 36-φ49 M45 3246 1778 1218 1270 598 387 414 1089 500 4953
1800 3D-200/12000 2115 2020 1950 70 245 710 730 680 40-φ49 M45 3720 2044 1426 1628 745 387 602 1399 500 7416
2000 3D-600/12000 2325 2230 2150 74 270 775 795 745 44-φ49 M45 3851 2115 1486 1630 750 417 602 1399 500 9372